Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Window Installation for Henderson Homeowners
Henderson homes take a beating from the sun. West-facing glass cooks through July and August afternoons, and single-pane aluminum units from the 1990s radiate that heat straight into the living room. If your windows fog between the panes, whistle on a windy day, or leave a hot spot on the carpet, a proper installation fixes all three at once. Our technicians have up to 10 years of experience installing across PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux lines, and we bring that knowledge to every opening in the house. We carry eight brands so you can compare performance, style, and price side by side rather than settle for what a single-catalog shop happens to stock. Call (844) 320-4954 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Casement Windows
Casement Windows crank open on a vertical hinge and seal tightly against the frame with a compression gasket, which makes them one of the most weather-tight styles you can put in a Henderson house. If your bedroom faces the afternoon sun and you want a window that closes against wind-driven dust, a casement beats a slider every time. We install casements across our PGT and CWS lines, sized to your existing rough opening so no reframing is needed. Most single casement installations run $450 to $950 installed, depending on size, frame material, and glass package, with impact-rated versions landing at the higher end. The written estimate sets the final price.
Crank Mechanism and Hardware
The crank, or roto operator, is the part that fails first on any casement. We set the operator arm and check that the sash pulls flush at the top and bottom before we call the job done.
Screen and Insect Control
A casement screen mounts on the interior side, so it stays out of the sun and lasts longer. We fit every casement with a screen sized to the opening and confirm the latch clears it cleanly.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Double Hung Windows
Double Hung Windows have two sashes that slide up and down independently, and they remain the most requested style in Henderson because they tilt in for cleaning on both floors of a two-story home. If your old single-hungs are painted shut or the sash cords have snapped, a full unit replacement is usually cleaner than trying to rebuild the hardware. We install double hungs from CGI and ES Windows with tilt-in sashes and a locking check-rail. Typical pricing runs $400 to $850 per window installed for a standard size, and energy-efficient glass packages from ES Windows add to that range. Your written estimate sets the final price.
Tilt-In Sash Cleaning
Both sashes release at the bottom and fold inward, so nobody has to lean out over a two-story drop. We check the tilt latches on every unit before we leave.
Balance Systems That Last
We use block-and-tackle and constant-force balances rather than the old spring-and-cord setup. That means the sash holds where you leave it, with no drift.
Vinyl Windows
Vinyl Windows use a welded PVC frame that will not rot, warp, or need repainting, which suits Henderson’s dry heat and intense UV exposure better than wood or unfinished aluminum. If your home still has the original builder-grade aluminum frames, a vinyl swap is the most cost-effective upgrade for both comfort and curb appeal. We install vinyl units from CWS and Mr-Glass with double-pane insulating glass and warm-edge spacers. Vinyl installations typically run $350 to $700 per window, and larger or arched units sit above that range. Everything is set per job by the written estimate. If you’re weighing styles, see our guide to window replacement in Henderson for a side-by-side comparison.
Color Options and Finish
Vinyl comes in white, tan, and bronze laminate finishes that hold color under desert sun. We help you match the trim and stucco already on the house.
Thermal Expansion Considerations
Vinyl expands and contracts with temperature swings. We leave the proper shim gaps during installation so the frame doesn’t bow or bind as the seasons change.
Picture Window
A Picture Window is a large fixed unit with no operable sash, designed to frame a view and let in maximum daylight without interrupting the glass with vertical stiles. If your living room or dining area looks out on the McCullough Range or a landscaped backyard, a picture window turns that wall into the focal point of the room. We install fixed picture units from PGT and ViewLux, and we can go wide: three- and four-panel configurations are common. Picture windows typically cost $700 to $1,800 installed depending on span and glass type, with impact-rated glass at the upper end. The written estimate confirms the price.
Structural Support for Wide Openings
A wide fixed unit needs proper header support, and we check the rough opening before the order is placed. That step protects you from a window that sags or leaks within a year.
Solar Heat Control
Fixed glass catches the most sun in the house. We offer low-E coatings and tinted options that cut solar gain without turning the room dim.
Bay Window Installation
Bay Window Installation projects a three-sided unit outward from the wall, adding floor space and a built-in seat while bringing light in from three directions. If you have a flat, unremarkable wall in a bedroom or breakfast nook, a bay changes the whole feel of the room. We handle bay installations with PGT and CWS units, including the framing, roof cap, and interior trim work that a bay requires. Bay window installation typically runs $2,500 to $6,000 depending on width and whether the opening needs new framing. Because bays involve cutting into the exterior wall, most cities require a permit for this work, so ask your city’s building department before scheduling. The written estimate sets the final price.
Framing and Sheathing
A bay carries more weight than a flush window, so the framing has to be solid. We build out the opening properly and cap it so water sheds away from the house.
Interior Seat and Trim
The interior finish is what makes a bay feel intentional rather than added on. We finish the seat board and trim to match your room.
Window Contractor
A Window Contractor handles the measurement, ordering, removal, installation, sealing, and cleanup for every unit on the job, and choosing the right one matters more than most homeowners expect. If you’ve decided to replace a set of windows and you want one point of responsibility, working with a single contractor avoids finger-pointing between a supplier and an installer. We measure every opening ourselves, order the product, and handle the installation start to finish. Window contractor pricing depends entirely on scope, so we put it in writing: a free line-item estimate covers product, labor, and disposal before any work is scheduled. When the job also needs entry or patio doors, a window installation contractor who handles both keeps the whole exterior envelope with one team.
Measuring and Ordering
We measure the rough opening, not just the visible glass, so the new unit fits without shimming surprises. Nothing is ordered until you approve the line-item quote.
Permits and Inspection
Where a permit is required, we pull it and arrange the inspection. You get documentation for the work, which matters when you sell the house.
Window Installers
Window Installers are the crew that actually sets the unit, shims it level, insulates the gap, and seals the exterior against wind and dust. If your windows leak at the frame or you can feel air moving around the trim, the problem often traces back to the original installation rather than the window itself. Our installers follow a consistent gap-and-seal method on every opening, and we check each unit for square and operation before moving to the next. Window installers cost is folded into the installed price, which for a standard replacement typically lands between $350 and $950 per window. The written estimate sets the final price, with no change orders once work begins. Homeowners in the Whitney and Paradise areas can book a window installation visit through the same free estimate line.
Flashing and Moisture Sealing
Las Vegas Valley rarely sees heavy rain, but when it does, a bad flashing job shows immediately. We flash the head and sill and seal the perimeter.
Insulation in the Cavity
The gap between the new frame and the rough opening gets filled, not left hollow. That keeps outside heat from bypassing the glass entirely.
Brands We Service
We work with PGT for impact-rated windows that hold up to wind-borne debris and give you storm resistance without a heavy frame look. CGI offers impact-rated vinyl units that combine budget-friendly pricing with solid thermal performance, and our installers know where each product’s hardware and gaskets wear first. We service CWS windows and are familiar with their frame and balance systems, which matters when a repair or a matching replacement is on the table.
ES Windows and ECO Window Systems give homeowners energy-performance options across a range of price points, and we know which glass packages make the most sense for a Henderson home facing west into the afternoon sun. ViewLux fixed and specialty units round out the lineup, and Mr-Glass serves as a budget-friendly vinyl choice. Therma-Tru entry and patio doors complete the exterior envelope. Whether you have PGT or any other make, we can help match the right product to your home, not to inventory pressure.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Condensation between the panes. Fog or water trapped inside a sealed unit means the seal has failed. It won’t dry out on its own, and the insulated value is gone even though the glass still looks intact from outside.
- Whistling or rattling on windy evenings. Air moving around the sash means the weatherstripping or the seal is compromised. Down the road that draft turns into dust intrusion and higher summer bills.
- Rot or soft spots in the frame. Wood frames in the Valley can dry, crack, and pull apart at the joints. A frame that flexes or crumbles means the window needs replacement, not a coat of paint.
- Difficulty opening or closing. A sash that sticks or won’t latch is a safety issue and often a sign the frame has gone out of square. In a bedroom, an operable window that actually opens is part of your emergency escape plan.
- Visible daylight at the edges. If you can see outside around the trim, the seal has failed entirely. That’s the point where we recommend a full unit replacement rather than patching.
Our Process, Step by Step
- 1
Free in-home measurement and consultation. We walk the house, measure every opening, and talk through how each room faces the sun. You don’t buy anything on this visit; you get a written line-item estimate you can compare against other quotes.
- 2
Product selection across eight brands. We put actual samples and performance specs for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux in front of you. Impact-rated glass, energy-efficient options, or a mix across the house are all on the table.
- 3
Ordering and permitting. We place the order and, where the work requires it, pull the permit and schedule the inspection. You get an installation date in writing before we order product.
- 4
Installation day. The crew lays drop cloths, removes the old units, checks each rough opening for square, sets and shims the new frame, insulates the cavity, flashes and seals the exterior, and tests every sash for smooth operation.
- 5
Final walkthrough and cleanup. We walk each window with you, confirm the locks and screens work, haul away all old units and packaging, and hand over the warranty paperwork. Any adjustment after that is covered under our workmanship warranty.
How Much Does Window Installation Cost in Henderson?
Window installation in Henderson typically costs between $350 and $950 per window, with the price driven by size, style, frame material, and glass package. A standard double hung or vinyl unit sits in that range. A wide picture window runs $700 to $1,800, and a bay installation lands between $2,500 and $6,000 because it involves framing and exterior finish work.
- Glass package: Low-E coatings, argon fill, and impact-rated glass each add to the base price. Impact-rated PGT and CGI units sit at the top of the range.
- Frame material: Vinyl is the most budget-friendly, with wood, fiberglass, and aluminum above it.
- Unit count and layout: Replacing the whole house spreads labor cost and gets you a lower per-window price than a single unit.
- Opening condition: A rotten or out-of-square rough opening adds framing time.
- Access and story height: Second-story work needs more setup and takes longer.
To avoid overpaying, compare line-item quotes rather than lump sums. Ask what glass package is in the quote, whether disposal is included, and whether the permit is covered. Every free estimate we give includes product, labor, disposal, and permit costs, and the written estimate sets the final price with no change orders. Call (844) 320-4954 for an exact quote.
Our Service Area Near Henderson
We install windows and doors across the Las Vegas Valley and the surrounding communities. That covers Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Spring Valley, Summerlin, North Las Vegas, Las Vegas, Boulder City, and Sandy Valley. Most locations get a fast dispatch from 7am to 7pm, Sunday through Friday, and our free estimate visits are scheduled around your availability. Homeowners east toward window installation in Paradise get the same multi-brand pricing and line-item quote as the rest of the area.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Installation in Henderson
Window installation is the removal of old window units and the fitting of new ones into the same rough opening, including shimming, insulating, flashing, sealing, and trim. It differs from a repair because the entire unit is replaced rather than a single part like a balance or a pane. We install windows and Therma-Tru doors together, so the full exterior envelope is handled by one team.
A single window takes about one to two hours, and a full house of eight to twelve units usually takes one to two working days. Bay windows add time because of framing and exterior capping. We give you a realistic schedule in your written estimate, before any product is ordered.
Typical installed pricing runs $350 to $950 per window, with picture windows at $700 to $1,800 and bay installations at $2,500 to $6,000. Impact-rated glass and energy-efficient packages land at the top of those ranges. Call (844) 320-4954 for a free line-item estimate; the written estimate sets the final price.
Yes. We install PGT windows, including their impact-rated lines, and we know the difference in frame and hardware across their product range. We also install CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, ViewLux, and Therma-Tru doors. Eight brands means you compare performance and price side by side instead of taking whatever one catalog offers.
Same-day service is available for some jobs, and our dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. We answer 24/7; a call outside dispatch hours is booked into the next opening. Planned installations are scheduled in advance, and we confirm your date in writing.
Manufacturer warranty on the window itself follows each brand’s terms, and our workmanship warranty covers the installation. We explain both during the final walkthrough and leave the paperwork with you. If a sash, lock, or seal problem shows up after installation, call us and we’ll handle it.
Clear furniture and wall hangings from each window area and make sure the crew can reach the openings. Children and pets should stay out of the work zones while glass is going in. If a permit is needed, we’ll confirm before the date so the inspection is handled in order.
Schedule Your Window Installation Service in Henderson Today
Windows that fit right and seal tight make a Henderson home cooler, quieter, and easier to sell. Get a free, no-obligation line-item estimate in writing and compare eight brands side by side. Call (844) 320-4954. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Window Replacement Henderson.