VLX 80 Series

VLX 80 Awning Window

Work is performed by our local vetted partner.

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

VLX 80 Awning Window in Henderson, NV

The VLX 80 Awning Window is a top-hinged aluminum window built by ViewLux, and we install it across Henderson as an authorized ViewLux partner. The sash swings outward from the bottom, so you can leave it open through a summer downpour and still get airflow without water coming in. That matters here, where monsoon afternoons arrive fast and the desert sun punishes anything poorly built. Homeowners choose the VLX 80 for bathrooms, kitchens, laundry rooms, and any spot where a casement would swing into a walkway. Because we’re an authorized partner, the window arrives sized to your opening and we handle the install to AAMA standards, warranty-safe. Call (844) 320-4954 for a free estimate.

Modern aluminum window installation viewed from inside a contemporary home in Henderson, NV

Call (844) 320-4954

Product Overview – VLX 80 Awning Window

The VLX 80 is a top-hinged aluminum awning window with an energy-efficient thermal break, and it’s the series ViewLux designed for homeowners who want real ventilation without giving up weather protection. The hinge sits at the top of the frame; the sash pushes out at the bottom on a crank or push-bar operator, depending on the configuration you order. Rain runs off the glass and down the exterior instead of into the room. In a place like Henderson, where a clear morning can turn into a gusty thundershower by afternoon, that geometry earns its keep.

Architecturally, the VLX 80 fits where a projecting sash would be a hazard or a nuisance. Think above a kitchen sink, beside a bathroom vanity, over a laundry counter, or in a home office where you want cross-ventilation without a door swinging into the room. Because it opens outward and the sash stays under the frame’s overhang, it also works well on upper floors and in tighter wall sections.

The engineering is where this series separates itself. The aluminum profile is 1.97 inches wide with a 0.079-inch wall thickness, which gives the frame rigidity without the bulk of older aluminum systems. The thermal break interrupts the metal path between interior and exterior, so the frame doesn’t conduct desert heat straight into your living room the way a solid aluminum window would. Buyers in Henderson who’ve lived with single-pane aluminum from the 1980s notice the difference the first summer. The hardware, gaskets, and operator are serviceable, and the finish is factory-applied so it holds up under UV exposure.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Technical Specifications

Here’s what you’re ordering when you specify the VLX 80 from us in Henderson:

  • Profile width: 1.97 inches
  • Wall thickness: 0.079 inches
  • Frame material: Aluminum with thermal break
  • Operation: Top-hinged, outward-projecting sash
  • Glass options: Clear, Frosted, Low-E, Tempered, Laminated
  • Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
  • Screen options: Fixed Screen, Retractable Screen
  • Performance standards: NFRC-rated thermal performance, AAMA 2400/2410 installation compliance, AAMA 812 low-expansion foam sealant on all perimeter joints
  • Ratings: Airtightness, waterproofing, mist prevention, sound control, and wind-load rated for local Henderson climate requirements
  • Impact option: Impact-resistant laminated glass available

Those numbers aren’t marketing language. The 0.079-inch wall and 1.97-inch profile are what give the frame its stiffness and its ability to hold a tight seal through Henderson’s temperature swings, where a 105-degree afternoon can drop thirty degrees overnight in the shoulder seasons.

Performance Features

Thermal Efficiency – The thermal break separates the interior and exterior aluminum faces, so heat transfer through the frame is interrupted at the source. Combined with Low-E glass, the VLX 80 is NFRC-rated, which means the performance you’re quoted is tested, not estimated. In Henderson’s climate, that translates to a cooler interior and less load on your AC.

Acoustic Performance – Awning windows seal on all four sides when closed, and the compression gasket does most of the work. The result is measurable sound control, which matters on Henderson streets near arterial roads or where a neighbor’s pool equipment runs all afternoon. Laminated glass takes that further.

Airtightness & Weather Seal – Every perimeter joint is sealed with AAMA 812 low-expansion foam, and the sash closes against a continuous gasket. That combination is what keeps dust out during a Henderson dust event and keeps conditioned air in when the window is shut.

Waterproofing – The top-hinge design sheds water by gravity rather than fighting it. Weep paths and sill geometry are built to drain, and the window carries a waterproofing rating tested to standard protocols. During monsoon season, that’s the difference between a dry interior and a wet windowsill.

Wind Resistance – The VLX 80 is wind-load rated to meet local climate requirements, which in Henderson means it’s engineered for gust events, not just gentle breezes. The frame’s wall thickness and the anchoring pattern matter here, and that’s a conversation about installation as much as product.

Security & Hardware – The operator and locking mechanism are built for the long haul, and the outward-opening sash sits tight against the frame when locked. A fixed or retractable screen adds a layer of separation. We can walk you through hardware choices during your estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Color & Glass Options

Six finishes are available, and the right one depends on your home’s style and your HOA. Premium Black and Anodized Silver suit contemporary Henderson builds and modern stucco elevations. Pure White works with traditional and Spanish Colonial revival homes. Bronze and Champagne are the safe middle ground for homes with tan or beige stucco, which is most of what you’ll see in Henderson. Teak Wood gives a warm, faux-wood look for interiors where aluminum would feel cold.

On glass, Clear is the baseline. Frosted is the pick for bathrooms and any window facing a neighbor. Low-E is what most Henderson homeowners choose, since it cuts solar heat gain without darkening the room. Tempered is required in some locations near doors or at floor level. Laminated is the upgrade for sound and, in impact-resistant form, for properties that need it. We’ll help you match glass to the specific window’s exposure.

Installation by Window Replacement Henderson in Henderson

An awning window is only as good as its install, and improper installation voids the manufacturer warranty. That’s not a scare tactic; it’s how the warranty is written. A frame set out of level or out of square will bind the operator, break the seal, and let Henderson’s summer heat and monsoon rain find the gaps. We install the VLX 80 to AAMA 2400/2410 standards, which is the industry benchmark for proper window installation.

Our process starts with a pre-install inspection: we check the rough opening, confirm the framing is sound, and verify the window matches the order. Then we set the unit level, plumb, and square, shim and anchor it per spec, and seal all perimeter joints with AAMA 812 low-expansion foam. We finish with a water test before we call it done, and we clean up the site. The whole job is warranty-safe from the manufacturer’s perspective, which matters when you’re spending real money on a window.

Henderson-specific considerations come up on nearly every job. The climate is dry and hot, so sealants need to be UV-stable and the foam seal needs to be the right type for the temperature swings. Stucco exteriors are the norm here, and we know how to work with them without cracking or leaving a mess. If your home is in a community with its own design guidelines or your project touches exterior walls, permits may be required, so we’ll walk you through what Henderson’s building department expects for your address. We also handle impact-glass placement where the exposure calls for it.

Frequently Asked Questions – VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window? Lead time depends on the size, glass choice, and finish you order, and we’ll confirm the current timeline in writing when you place your order. Custom sizes and impact glass typically take longer than standard clear or Low-E units. Call (844) 320-4954 and we’ll give you a firm date for your specific configuration.

Does the VLX 80 qualify for energy tax credits? It can, if the glass and frame combination you choose meets the efficiency thresholds for the credit year. Because those thresholds and rules change, we won’t guess: we’ll give you the performance documentation for your exact configuration so you or your tax preparer can confirm eligibility. The NFRC rating on the VLX 80 is the number that matters here.

What warranty comes with the Awning Window? The ViewLux product warranty covers the window itself, and it’s conditioned on proper installation. That’s why we install to AAMA standards and document the work. Installation-related coverage is handled by us as the authorized partner. We’ll provide the written warranty terms with your quote so there are no surprises.

Can I customize the size? Yes. The VLX 80 is ordered to your opening, not trimmed down on site, which is what keeps the warranty intact. We measure precisely during the free on-site measurement and confirm the rough opening before the order goes in. Irregular openings in older Henderson homes are common and we plan for them.

How do I maintain aluminum frames? Very little is required: wipe the frame with a mild soap and water solution a couple of times a year, keep the weep paths clear, and lubricate the operator and hinges per the manufacturer’s schedule. Don’t use abrasive cleaners on the factory finish. If the operator ever feels stiff, call us before forcing it. Call (844) 320-4954 with any maintenance question.

Get a Quote – VLX 80 Awning Window in Henderson

Ready to price the VLX 80 for your Henderson home? We’ll schedule a free on-site measurement, confirm your glass and finish choices, and give you a written line-item estimate with the final price locked before work begins. Every install is done to AAMA standards and backed by our workmanship warranty. Call (844) 320-4954 today to start your project or schedule a free estimate. We’re glad to answer questions before you commit.

Written by the team at Window Replacement Henderson.

Bring This System Into Your Home

Factory-direct pricing, free in-home measurement, certified installation in Henderson.

(844) 320-4954
Call Now - 24/7 Dispatch
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Window Replacement Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch