Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Door Installation for Henderson Homeowners
A door that sticks, leaks dust, or rattles in the wind is a daily reminder that something in the opening has given out. In Henderson that usually means sun-baked seals, warped slabs, or hardware that’s been through too many dry summers. We install doors as part of a full exterior-envelope service built around windows and doors only, and our technicians bring up to 10 years of experience to each opening. You get a written, line-item estimate before anything is ordered, and the price on that estimate is the price you pay. Call (844) 320-4954 to book a free estimate. We answer 24/7.
Because we work across eight product lines, our recommendations follow the house and the budget rather than whatever sits in a single catalog. That range covers impact-rated options through PGT and CGI, energy-focused builds from ES Windows and ECO Window Systems, and Therma-Tru entry and patio doors. If you’re also weighing glass upgrades, our window replacement Henderson page covers the other half of the envelope.
Front Door Replacement
Front Door Replacement means removing the old entry door, frame and threshold and installing a new prehung unit that closes square, locks smoothly and seals against wind-driven dust. It’s the right call when the slab has swelled or cracked, the frame has rotted at the sill, daylight shows around the edges, or the hardware no longer lines up no matter how often you adjust it. We install Therma-Tru entry systems and can match a style to the facade instead of forcing a generic panel onto it. A typical front door replacement in Henderson runs roughly $1,200 to $3,500 including the unit, hardware and labor, with the written estimate setting the final figure.
Choosing the Right Entry Slab
Steel holds up well against sun and temperature swings, fiberglass resists dents and can be finished to look like wood, and solid wood brings warmth at the cost of more upkeep in dry heat. We’ll walk you through how each behaves on a Henderson elevation that takes direct afternoon sun. Bring photos of the entry and we can narrow it down quickly.
Sidelights and Transoms
Adding glass beside or above the door changes the whole entry without changing the opening’s footprint. We can specify decorative or impact-rated glazing so the look and the performance both hold up. It’s a common upgrade when a homeowner is already replacing the door.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Door Replacement
Door Replacement covers any exterior or interior door swap where the opening stays put and the unit changes out: back doors, garage service doors, laundry and closet doors, and the older hollow-core slabs that have absorbed years of heat. You need it when a door has delaminated, the veneer has split, the hinges have torn out of the jamb, or the unit simply no longer fits the opening it was hung in. We handle the measuring, the ordering and the install as one job, and we can pull from PGT, CGI, CWS and other lines depending on what the opening calls for. Typical door replacement in Henderson runs about $600 to $2,200 depending on size, material and hardware, confirmed in writing before work starts.
Measuring the Rough Opening
We measure the rough opening in three places for height and width and check the jamb for plumb before ordering. Getting this right the first time avoids the shims-and-filler scramble that shows up later. It’s also where we catch a wall that’s out of square before it becomes a problem.
Matching Trim and Finish
A new door rarely matches the existing casing, so we plan the trim detail at the estimate stage. You’ll know whether we’re reusing the old casing or installing new. That decision affects both the look and the line item.
Sliding Glass Door Replacement
Sliding Glass Door Replacement is the swap of the full slider assembly, frame and tracks included, when the old unit drags, leaks, or has lost its seal. It’s due when the rollers have worn flat, the track is dented beyond adjustment, condensation sits between the panes, or the frame has pitted after years of hard water and sun. Sliding doors take more abuse than any other opening in a Henderson home because they’re used constantly and face full sun on one side. We replace them as complete units rather than fighting a tired frame, and we can specify impact-rated glass through PGT or CGI lines. Expect roughly $1,800 to $4,500 for a sliding glass door replacement in Henderson, with the estimate fixing the number.
Panel Configuration and Traffic Flow
Two-panel, three-panel and multi-slide configurations each suit a different room layout and furniture plan. We’ll look at which direction the door travels and where the walkway lands before recommending a setup. The point is a door you don’t have to think about opening.
Glass and Frame Options
Aluminum frames suit a clean modern line, while vinyl and composite frames hold up well against heat cycling. Low-E glass options cut solar gain on west-facing walls that take the worst of the afternoon. We’ll show the difference so you can weigh cost against comfort.
Storm Door Installation
Storm Door Installation adds a secondary door in front of your entry to block wind-driven dust, cut solar heat on the slab, and let you leave the main door open for light without inviting the neighborhood in. It’s worth doing when the entry faces the prevailing wind, when the main door gets too hot to touch in summer, or when you want a screen for cross-ventilation without insects. We hang them square, set the closer so it doesn’t slam, and confirm the latch lines up before we leave. Storm door installation in Henderson typically runs $350 to $900 installed, depending on the door, the hardware and whether the opening needs adjustment first.
Full-View Versus Panel Styles
Full-view doors are mostly glass with a slim frame and suit a modern entry. Panel styles with interchangeable glass and screen inserts give more flexibility through the seasons. We’ll bring samples so the choice is a look, not a guess.
Closer and Latch Adjustment
A storm door that slams eventually pulls the jamb loose. We set the closer tension and check the latch strike so the door closes firmly and quietly. Small adjustment, big difference in how long the door lasts.
Sliding Glass Door Installation
Sliding Glass Door Installation means putting a new slider into a new or enlarged opening, including framing checks, flashing and finish work. This is the scope when you’re adding a patio access point, converting a window to a door, or replacing a wall opening during a remodel. We work with impact-rated sliders through PGT and CGI where the exposure warrants it, and we coordinate the door spec with the rest of the exterior so the transition from wall to glass is clean. Sliding glass door installation in Henderson runs roughly $2,000 to $5,000 depending on size, glass package and how much framing the opening needs.
Framing and Flashing Detail
Water intrusion at a slider almost always traces back to flashing, not the door itself. We make sure the sill pan and the wall flashing lap correctly before the unit goes in. It’s the part of the job nobody sees and the part that matters most.
Threshold and Drainage
Henderson’s occasional heavy rain events find every weak threshold. We set the slider so water sheds away from the interior and the weep holes stay clear. A level sill and a clear drain path settle most of it.
Door Repair
Door Repair fixes the door you already have when the problem is hardware, alignment or seal rather than the whole unit. It’s the sensible route when the slab is solid, the frame is sound, and the trouble is a dragging bottom, a deadbolt that won’t seat, a hinge that’s pulled loose, or weatherstripping that’s crumbled away. We diagnose the actual cause before quoting, because a door that sticks is sometimes a hinge problem and sometimes a house settling problem. Repairs in Henderson generally fall between $150 and $500 depending on what’s involved, and we’ll tell you plainly when a repair no longer makes sense against a replacement. Call (844) 320-4954 for a free estimate.
Adjusting a Binding Door
We check the gap around the slab, the hinge screws and the jamb for plumb to find why the door drags. Often a hinge adjustment and a fresh set of longer screws solve it. When the frame itself has moved, we say so instead of masking it.
Hardware and Seal Refresh
Deadbolts, handlesets, sweeps and weatherstripping all wear out and all affect how the door seals. Replacing them restores a tight closure at modest cost. It’s the least expensive way to get a draughty door feeling solid again.
Exterior Door Installation
Exterior Door Installation covers any door that separates the interior from the outdoors: side entries, garage-to-house doors, service doors and back doors. These openings take more punishment in Henderson than interior ones because they face sun, wind-blown dust and big temperature swings between day and night. You need this work when an exterior door has rotted at the bottom rail, lost its weather seal, or was never hung correctly in the first place. We install them as prehung units with the frame, threshold and weatherstripping included so the seal is right from day one. Exterior door installation in Henderson typically runs $800 to $2,800 installed depending on the door, hardware and any frame repair the opening needs.
Weather Sealing That Lasts
Threshold seals, sweeps and compression weatherstripping are what keep dust out and conditioned air in. We use components rated for the heat and sun exposure these openings see. That matters more here than in a mild climate.
Security and Locking Points
A solid door is only as good as the strike plate and the deadbolt that meet it. We reinforce strike plates and check that the lock seats fully with the door closed. Door hardware is one of those places where small details hold up over time.
French Door Installation
French Door Installation puts in a paired hinged door set, usually glass-heavy, that opens onto a patio or garden rather than sliding. It’s the right choice when you want the full opening clear for furniture and foot traffic, more daylight in a room, or a more traditional look than a slider offers. We install hinged and stationery combinations that suit the wall and the sightline, with glazing options from our multi-brand range including impact-rated glass where it’s specified. French door installation in Henderson generally runs $2,200 to $5,500 depending on size, material and glass package. The written estimate sets the final cost.
In-Swing Versus Out-Swing
Out-swing doors free up interior floor space but need clearance on the patio side. In-swing doors are the more common residential choice and easier to screen. We’ll look at the room and the landing before recommending a direction.
Pairing With Window Upgrades
French doors look best when the surrounding windows share the same frame profile and glass tint. If you’re planning both, see our window installation page and we’ll spec them together. Matching profiles is cheaper and cleaner than doing it in two separate jobs.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We install and service Therma-Tru entry and patio doors, a name most homeowners already know for residential door systems. We also work with PGT and CGI, whose impact-rated product lines suit Henderson openings that need storm and wind resistance without a heavy look. CWS offers solid value across replacement openings, and ES Windows and ECO Window Systems give you energy-performance options at different price points. Mr-Glass and ViewLux round out the range for homeowners chasing a particular style.
Because we carry eight brands rather than one or two, we can compare performance, style and price side by side for the same opening. That means the recommendation follows the fit, not the inventory. Whether you have a Therma-Tru door or any other make, we can help you decide what to do next.
Signs You Need a Pro Right Now
- Daylight or dust around the edges. If you can see light or feel grit coming in past the frame, the weatherstripping has failed or the door is out of square. Both let conditioned air escape and dust settle indoors.
- The door drags or won’t latch. A binding door usually means a hinge, jamb or settling issue rather than the slab itself. Left alone, it wears the hardware and stresses the frame.
- Fog or condensation between panes. Sealed glass units that fog have lost their gas fill and no longer insulate. It’s a sign the whole unit, not just the seal, needs replacing.
- Rot or softness at the sill or bottom rail. Moisture collects at the threshold and works into the wood first. If the sill feels soft underfoot, the damage is already past the surface.
- The door no longer locks securely. A deadbolt that misses the strike or a frame that’s shifted compromises security and lets air in. It’s worth having it checked rather than lived with.
Our Process, Step by Step
- 1
Free in-home estimate. We measure the opening, check the frame and talk through what you want from the door. You get a written, line-item quote with no change orders later.
- 2
Product selection. We compare options from across our brand lines, matching material, glass and hardware to the opening and the budget. No pressure toward a single catalog.
- 3
Ordering and scheduling. Once you approve the estimate, we order the unit to spec and confirm a date that works. Lead times depend on the product line, so we set expectations up front.
- 4
Installation. We remove the old unit, check the opening for plumb and square, set the new door, flash and seal it, and adjust the hardware. Careful detail work at this stage is what keeps a door working for years.
- 5
Final walkthrough. We test the swing, latch, lock and seal with you and confirm everything closes as it should. Any permit required by your city’s building department is pulled before the work and the inspection is passed afterward.
How Much Does Door Installation Cost in Henderson?
Door installation in Henderson generally runs from about $350 for a storm door up to roughly $5,500 for a large French or multi-slide unit, and the opening, the material and the glass package drive most of the spread. A typical front door replacement with a Therma-Tru unit and new hardware lands somewhere around $1,200 to $3,500; a standard exterior or interior door swap is closer to $600 to $2,200; and a sliding glass door replacement usually sits between $1,800 and $4,500. French doors and larger sliders with impact-rated glass push toward the top of the range.
Several things move the number. Frame condition is the big one: an opening that’s sound needs no framing repair, while a rotted sill or an out-of-square wall adds labor. Glass packages matter too, since impact-rated and energy-efficient options cost more than standard glazing but perform differently against sun and wind. Hardware, finish and trim detail all add up as well.
The way to avoid overpaying is to compare on a written, line-item estimate rather than a single lump figure, and to make sure the quote includes removal, disposal, flashing and hardware. Ours does. When you book a free estimate, we measure the opening, confirm the brand and model, and put the full scope in writing so the final price matches what you approved.
Our Service Area Near Henderson
We serve homeowners across the Henderson area, including Henderson, Whitney, Paradise and the surrounding neighborhoods of the Las Vegas Valley. Response timing depends on where you are and the day, but we dispatch Sunday through Friday, 7am to 7pm, with same-day availability in many cases. Wherever you sit in the valley, the estimate is free and the scope is the same.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Henderson
Door installation is the removal of an existing door and its frame and the fitting of a new prehung unit that closes square, latches cleanly and seals against wind and dust. It includes the slab, the frame, the threshold, the hardware and the weatherstripping. We handle the measuring, ordering and install as a single job. Call (844) 320-4954 for a free estimate.
Most single-door installations take a few hours on the day of work, while French doors, sliders and openings that need framing take longer. Lead time on the product itself varies by brand and model. We’ll give you a realistic window at the estimate so you can plan around it. Call (844) 320-4954 to book yours.
It depends on the door and the opening, but typical ranges run from about $350 to $900 for a storm door, $600 to $2,200 for a standard door swap, and $1,800 to $5,000 for sliders and French doors. Impact-rated and energy-efficient glass packages push toward the top. Every job is priced per the written estimate. Call (844) 320-4954 for an exact quote; estimates are free.
Yes, Therma-Tru is one of the brands we install and service, alongside PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass and ViewLux. We know where these doors wear, from the threshold to the lock strike. Call (844) 320-4954 to talk through your door.
We offer same-day service in many cases and dispatch Sunday through Friday, 7am to 7pm, closed Saturday. We answer 24/7, so a call outside dispatch hours is booked into the next opening. Call (844) 320-4954 to confirm availability for your address.
Your door carries the manufacturer’s warranty, and our workmanship is backed too. We walk you through both at the estimate so you know what’s covered and for how long. Questions after install are welcome.
Clear the area on both sides of the door so the team has room to work, and take down anything fragile near the entry. Move furniture away from the swing path and keep pets in another room. If you’re replacing an exterior door, plan for the opening to be open for part of the day. Call (844) 320-4954 with any questions before the visit.
Schedule Your Door Installation Service in Henderson Today
Getting the right door for your home starts with a measurement and a conversation, not a catalog. Call (844) 320-4954 for a free, no-obligation estimate and a written, line-item quote. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s a front entry, a slider or a full set of French doors, we’ll match the product to the opening and the budget.
Written by the team at Window Replacement Henderson.