Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateWhy Henderson Homeowners Choose CGI Windows & Doors
We provide independent CGI windows and doors service in Henderson, NV – diagnosis, repair, replacement, and installation of CGI vinyl and impact-rated products. What sets our CGI work apart is component-level familiarity: frame extrusions, sash balances, glazing seals, and impact-laminated glass, not just the name on the label. We are an independent service provider, not affiliated with or authorized by CGI, so we diagnose the actual failure instead of steering you toward a factory claim that may not apply.
That independence matters in Henderson. When a CGI slider drags or a seal fogs, you want someone who can tell you whether it’s a roller, a gasket, or a glazing failure – and price the fix honestly. Our technicians have up to 10 years of experience with vinyl and impact assemblies. Call (844) 320-4954 for a free estimate.
Why Trust Window Replacement Henderson for Your CGI Windows & Doors?
CGI builds vinyl and impact-rated products engineered for heat, wind, and sun exposure – the same conditions Henderson throws at every window on a west-facing wall. Our technicians know these assemblies at the component level: how the frame extrusions seat, how sash balances wear, how glazing seals fail at the interlayer edge, and how impact-laminated glass behaves after years of intense UV.
We service CGI with quality parts that fit the equipment. That means matching roller and balance profiles to the extrusion rather than forcing a universal substitute that binds within a season. We work warranty-safe: we diagnose the real failure, document what we find, and tell you plainly when a component is covered versus when it’s normal wear.
Because we handle eight brands, our recommendation is based on fit, not inventory pressure. If a CGI unit is repairable, we repair it. If it’s beyond economical repair, we say so – and we can show you what a replacement in another line looks like side by side. That’s the advantage of a multi-brand specialist working on your CGI windows in Henderson. Call (844) 320-4954 to schedule your free estimate.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Fix in Henderson
Henderson sits in the Mojave, where summer highs routinely climb above 105°F and UV and wind-blown dust never let up. That combination drives a predictable set of CGI failures. Here’s what we see most.
- Dried weatherstripping and glazing gaskets. Desert UV and constant heat cycling degrade the vinyl weatherstripping and glazing gaskets on CGI vinyl windows long before the frame itself gives out. The result is drafts and fine dust infiltration around the sash and meeting rail – a seal problem, not a glass problem. Replacing the weatherstripping and gaskets usually restores the seal without touching the frame.
- Binding horizontal rollers and 3-lite sliders. On CGI horizontal roller and 3-lite sliding vinyl windows, panels bind when the rollers flatten and the track collects fine desert grit. The sash drags, jumps, or won’t seat flush. This is mechanical wear accelerated by dust – new roller assemblies and a cleaned track solve it in most cases.
- Impact-laminated glass hazing at the interlayer edge. Impact-laminated CGI glass can develop seal failure or hazing at the interlayer edge after years of intense sun exposure. That’s distinct from a simple broken pane and points to the laminated assembly itself, not the frame or hardware. On sun-facing elevations this shows up earlier.
- Warped or bowed vinyl frames and sashes. Vinyl frames and sashes on older CGI installs can warp or bow on sun-facing elevations, throwing the sash out of square and breaking the seal at the meeting rail. Once a frame is out of square, hardware fixes only go so far – this is where repair versus replacement becomes a real conversation.
- Worn locks, keepers, and tilt-latch hardware. Factory-installed CGI locks, keepers, and tilt-latch hardware wear or corrode and stop pulling the sashes tight. Loose meeting rails let wind-driven dust and water past the seal. Replacing the hardware restores the compression that keeps the unit weather-tight.
Here’s how a typical CGI job usually goes: a homeowner notices a horizontal roller or 3-lite slider dragging and letting desert dust in along the meeting rail. The usual cause is flattened rollers plus grit in the track, sometimes paired with dried weatherstripping. A qualified local pro pulls the sash, checks the rollers and track for wear, replaces the roller assemblies and weatherstripping, and confirms the panel latches tight and seals flush. On sun-facing impact units, the same visit often reveals hazed or delaminated interlayer edges – flagged separately from a hardware fix, because it’s a different repair with a different cost.
CGI Parts & Our Repair-vs-Replace Approach
When genuine CGI replacement components – sash balances, rollers, weatherstripping, glazing seals, and hardware – are still available, they’re the right call. Aftermarket roller and balance substitutes rarely match the extrusion profile, so a universal part that fits today tends to bind or fail within a season. We don’t claim to stock OEM parts; we source quality parts that fit your CGI equipment.
Where OEM parts are discontinued, we match by profile and function – the same extrusion geometry and travel, the same sealing behavior – and we’re honest about the limits of that match.
Deciding repair versus replace comes down to three questions: Is the frame still square? Is the glazing seal intact? Are the right parts available? If the frame has warped on a sun-facing wall or the laminated glass has failed at the interlayer edge, a hardware repair won’t fix the underlying problem, and replacement is the smarter spend. Call (844) 320-4954 and we’ll walk you through which side of that line your CGI unit falls on.
Our CGI Service Process – Step by Step
CGI work in Henderson follows a consistent path from first look to final seal test.
- 1
Diagnosis. We inspect the frame for square and bow, check sash balances and rollers for wear, test the glazing seal and interlayer edge, and look at weatherstripping and hardware compression. We separate hardware wear from glazing failure from frame failure – because each one calls for a different repair.
- 2
Repair or install. For repairs, we replace the failed components with quality parts that fit the CGI extrusion profile. For installation, we set the unit square, shim correctly, and seal the perimeter against wind-driven dust and monsoon rain.
- 3
Test. We operate every sash and panel, confirm the meeting rail seals flush, check the latch and keeper pull tight, and verify no light or draft passes the frame.
- 4
Warranty conversation. We document what was done and what it covers. If a component is under a manufacturer warranty, we tell you; if it’s normal wear, we tell you that too.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Henderson
We service and install the CGI products Henderson homes actually have.
- Horizontal roller and sliding impact windows. Roller and track service, sash alignment, and sealing on sliding vinyl and impact units.
- Double hung impact windows. Balance replacement, tilt-latch service, and meeting-rail sealing on double hung impact units.
- Single hung vinyl replacement windows. Balance and weatherstripping work on single hung vinyl series.
- Impact-rated vinyl windows. Sentinel-line impact units, including glazing-seal inspection and component repair.
- Vinyl patio and entry door systems. Alignment, hardware, and sealing on CGI vinyl patio and entry door assemblies.
We don’t claim to stock these products – we service them, and when replacement is the right answer, our multi-brand range lets you compare CGI against other options side by side.
We Also Service These Brands
CGI is one of eight brands we work with. We also service PGT, CWS, ES Windows, and ECO Window Systems, alongside Mr-Glass, Therma-Tru, and ViewLux. That range means we can match the product to your home instead of steering you to a single house brand. If you’re comparing CGI against impact options from PGT or an energy-focused line from ECO Window Systems, we can show you the differences on paper and on your wall.
FAQs – CGI Windows & Doors Service in Henderson
No. We are an independent CGI service provider and are not affiliated with or authorized by CGI. That independence is a benefit: we diagnose the actual failure and recommend the repair that fits, rather than routing everything toward a factory claim. Call (844) 320-4954 for a free estimate.
It’s almost always a roller and seal problem, not the whole window. Flattened rollers plus fine desert grit in the track make the panel drag, and dried weatherstripping lets dust past the meeting rail. Replacing the roller assemblies and weatherstripping usually restores smooth operation and a tight seal. We check the frame for square while we’re there – if it’s still true, the fix stays a hardware repair.
Yes, sun-facing impact units here age faster at the glazing than in milder markets. Intense UV and relentless heat cycling can haze or delaminate the interlayer edge on impact-laminated CGI glass over the years. That’s distinct from a broken pane: the glass is intact but the laminated assembly is failing. We inspect the interlayer edge on every impact unit and tell you whether it’s a seal issue or a replacement.
It depends on how far out of square it’s gone. Mild bowing sometimes responds to hardware and balance work, but a sun-facing sash that’s warped enough to break the meeting-rail seal usually isn’t worth repairing – the seal won’t hold. We measure square before recommending either path. Call (844) 320-4954 and we’ll give you a straight answer on your CGI unit.
They’re built to the same idea – laminated glass and reinforced assemblies that resist wind-borne debris and storm loading – but the product is matched to your home and local conditions. CGI’s impact-rated products are engineered for heat, wind, and sun exposure. Henderson doesn’t face hurricane landfalls, but spring and winter winds off the McCullough Range and monsoon dust storms still put real load on every opening. We’ll tell you what impact rating makes sense for your exposure.
Clean the tracks, keep rollers free of grit, and inspect weatherstripping and glazing gaskets annually. In Henderson’s heat, UV degrades vinyl seals faster than the frame, so replacing weatherstripping on schedule prevents the drafts and dust infiltration that follow. A yearly check of hardware compression and the meeting-rail seal goes a long way. Call (844) 320-4954 to book a maintenance visit or free estimate.
Pricing depends on the repair, the unit, and whether the frame and glazing are sound. A hardware fix – rollers, balances, weatherstripping, hardware – sits at the low end; a glazing or frame replacement sits higher. We don’t quote from a list; we diagnose first, then give you a written estimate before any work starts. Call (844) 320-4954 for a free estimate on your CGI windows or doors in Henderson.
Book Your CGI Service in Henderson, NV
Whether your CGI slider is dragging, your impact glass is hazing at the edge, or you’re choosing CGI against another line, we’ll diagnose the real problem and give you a written estimate – free. Call (844) 320-4954. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Window Replacement Henderson.